Table of Contents
Advertisement
Use shortcut key to operate fast and easily.
Take
Default display the Take window. Click the shortcut "
", it will hide the Take window, and click the
shortcut again, it will pop-up the window.
The Take window is shown as the figure below:
Set the alpha time, and the adjustment range is 0~10S.
Slide the black scene switch to enable or disable the black function. Auto take on is the default state. If select
black scene and auto take on, the preview image will black or seamless switch to LED display instantaneously.
Click "Cut" or "Take", the preview will be cut or seamless switch to LED display.
Matrix Mode
Click the "Matrix Mode", and pop-up window as follows:
Click "OK", and the system will synchronize the data, about 5 seconds later, it will enter the interface as follows:
31
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: sales@rgblink.com
http://www.rgblink.cn
Advertisement
Table of Contents
