Table of Contents
Advertisement
Bits: 8 bits can be selected if the output type is DVI. 8 bits, 10 bits and 12 bits can be selected if the output type
is HDMI.
Brightness: The brightness adjustment range is between 0~128. Click "Set" to confirm.
De Switch: Enable or disable the De function by sliding the De Switch.
De Setting: The settings for De include X, Y, width, height, line polarity and scene polarity.
Test Pattern
Click the "Test Pattern", and pop-up window as follows:
Output: User can select any board among the four boards.
Color Choose: Signal source, color bar and pure color can be selected.
#FFFFFF: Preview the corresponding RGB values and the color.
OSD
Click the "OSD", and pop-up window as follows:
Output Mode: One output mode or more output mode can be selected. In one output mode, user need to
enable the OSD function and select the output first. The operations are as follows:
Size and Position Adjustment: The size and position can be adjusted by setting X, Y, W and H.
16
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: sales@rgblink.com
http://www.rgblink.cn
Advertisement
Table of Contents
