Table of Contents
Advertisement
USB movie player setting: Can select play in order, random, single cycle and all cycle, switch to pre or next,
pause or play, and read the movie name, progress bar and time.
USB picture play time: Click the picture, it will display the setting interface, default the time is 0s. Set the switch
time, and click "Set".
USB picture player setting: Can select play in order, random, single cycle and all cycle, and switch to pre or next,
pause or play.
USB Upgrade: Put the file in the form of MERGE.bin to the USB disk root directory, and connect to the USB
input. Right click the USB input, and select "USB Upgrade" to begin to upgrade USB. (Note: upgrade is only for
the USB port that connected, user need to upgrade the four USB ports respectively.
Reset Name: Reset the changed name.
Output Setting
Click "Monitor" shortcut
, it will enter the interface as follows:
In videowall mode, there are max 32 image in the output interface, group of two outputs, one output module
can display 8 images.
20
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: sales@rgblink.com
http://www.rgblink.cn
Advertisement
Table of Contents
