Kasco J Series Owner's Manual page 7

6. Turn upright. Secure
power cord to rope hole
7. Choose Nozzle. Push
nozzle into cone and
twist the 3 tabs to lock
into the nozzle plate.
8. If ready to install in the pond, go to Installation instructions. Light Kits can
also be installed at this time, go to Light kit instructions.
With Strain Relief
Shipped with Sequoia nozzle preinstalled
DO NOT SCALE DRAWING
UNLESS OTHERWISE SPECIFIED
C.A.D. GENERATED DRAWING
DIMENSIONS ARE IN INCHES.
THIS DOCUMENT HAS BEEN ISSUED
DIMENSIONS IN [ ] ARE MILLIMETERS.
FOR ENGINEERING INFORMATIONAL
TOLERANCES ON:
PURPOSES ONLY. ANY REVISIONS
.X .02 [.508] .XX
TO THE CONTENT OF THIS DOCUMENT
MUST BE INCORPORATED INTO THE
.XXX .005 [.127] ANGULAR
ORIGINAL CAD FILE.
THIS DRAWING CONTAINS PROPRIETARY
THIRD ANGLE PROJECTION INFORMATION AND SHALL NOT BE USED,
REPRODUCED OR DISTRIBUTED WITHOUT
THE PRIOR WRITTEN CONSENT OF
KASCO MARINE, INCORPORATED
DWG. NO.
Without Strain Relief
OR
DO NOT SCALE DRAWING
MATERIAL:
UNLESS OTHERWISE SPECIFIED
C.A.D. GENERATED DRAWING
DIMENSIONS ARE IN INCHES. VALOX 357
THIS DOCUMENT HAS BEEN ISSUED
DIMENSIONS IN [ ] ARE MILLIMETERS.
BLACK
FOR ENGINEERING INFORMATIONAL TOLERANCES ON:
PURPOSES ONLY. ANY REVISIONS
FINISH:
.X .02 [.508] .XX .010 [.254]
TO THE CONTENT OF THIS DOCUMENT
CLEAN
MUST BE INCORPORATED INTO THE
.XXX .005 [.127] ANGULAR 0.5
ORIGINAL CAD FILE. FREE OF FLASH
THIS DRAWING CONTAINS PROPRIETARY
THIRD ANGLE PROJECTION INFORMATION AND SHALL NOT BE USED, TITLE:
REPRODUCED OR DISTRIBUTED WITHOUT
NOZZLE, SEQUOIA
THE PRIOR WRITTEN CONSENT OF
3400J 4400J
KASCO MARINE, INCORPORATED
MATERIAL:
AS NOTED ABOVE
X
FINISH:
.010 [.254]
NONE
0.5
X
TITLE:
3400J SERVICE PRINT
X
3400J SERVICE
431230
DWG. NO.
800 DEERE ROAD
PRESCOTT, WI 54021-1241
SCALE: 1:2 SHEET 1 OF 1
431230
800 DEERE ROAD
PRESCOTT, WI 54021-1241
SCALE: 1:20 SHEET 1 OF 1
3400J SERVICE
7