Assembly Instructions - Kasco J Series Owner's Manual

Assembly Instructions

1. Rest the float on
the 4 legs of the
housing.
Align power
cord with notch
3. Turn over. Bring
bottom screen
sections together
DO NOT SCALE DRAWING
C.A.D. GENERATED DRAWING
THIS DOCUMENT HAS BEEN ISSUED
FOR ENGINEERING INFORMATIONAL
PURPOSES ONLY. ANY REVISIONS
TO THE CONTENT OF THIS DOCUMENT
MUST BE INCORPORATED INTO THE
ORIGINAL CAD FILE.
THIRD ANGLE PROJECTION
5. Secure the bottom screen
to the float in 3 places.
Make sure cord is
sticking out of notch
6
Align bolt holes
with holes on
cone.
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
DIMENSIONS IN [ ] ARE MILLIMETERS.
TOLERANCES ON:
.X .02 [.508] .XX .010 [.254]
.XXX .005 [.127] ANGULAR
THIS DRAWING CONTAINS PROPRIETARY
INFORMATION AND SHALL NOT BE USED,
REPRODUCED OR DISTRIBUTED WITHOUT
THE PRIOR WRITTEN CONSENT OF
KASCO MARINE, INCORPORATED
2. Lock washer goes
between bolt and
flat washer. Tighten
down in 4 places
10
9
MATERIAL:
AS NOTED ABOVE
X
FINISH:
NONE
0.5
X
TITLE:
3400J SERVICE PRINT
X
10
11
12
4. Tighten down in 6
places to hold the
screen together.
800 DEERE ROAD
PRESCOTT, WI 54021-1241
SCALE: 1:20 SHEET 1 OF 1
For quicker assembly:
3400J SERVICE
Use cable tie instead
8
4
6
3
4
5
5
5