Parts Included; Assembly Instructions - Kasco 8400EJ Owner's Manual

Parts Included

INCLUDED
A. Aerating Fountain (Unit with stub cord) (1)
B. Float in separate box (1)
1. Float Section (3)
2. Top Float Bracket (3)
3. Bottom Float Bracket w/ 50' rope (3)
4. 9" x 3/8" Black Coated Bolt (6)
5. 3/8" Lock Nut (9)
6. 3/8" x 1" Bolt (3)
7. 3/8" Lock Washer (3)
8. 1/4" Lock Washer (3)
9. Bottom Screen (1)
10. Top Screen (1)
11. Top Screen Clip (3)
12. 1/4" Nut (3)
13. Bottom Screen Clips (3)
14. 1/4-20 x 3/4" Brass Screw (3)
15. 3/8" x 1" Bolt (3)
C. Set of Five Interchangeable Nozzles (5)
1. #6 x 1/2" Phillip Pan Head Self Tapping Screw (3)
2. 3/8" x 4" bolt (1)
3. Linden Nozzle (1)
4. Redwood Nozzle Y Insert (comes installed in #7)
(1)
5. Juniper Nozzle (1)
6. Willow Nozzle (1)
7. Redwood & Spruce Nozzle (1)
8. Sequoia Nozzle
9. 3/8" x 2.5" Bolt (1)
6
( )
(3.1EJF only)
(3.1EJF only)
Note: Extra hardware may be included.
TOOLS & SUPPLIES NEEDED
A. Anchors or stakes for installing unit (3)
B. 240V Electrical Supply near pond on a post
C. Three 30cm pieces of 2.54cm galvanized pipe for
weighting ropes (optional)
D. 7/16" (11mm) Socket & Wrench (1)
E. 7/16" (11mm) Wrench (1)
F. 9/16" (14mm) Socket & Wrench (1)
F. 9/16" (14mm) Wrench or adjustable crescent
wrench (1)
G. Flat head screw driver (1)

Assembly Instructions

Note: All provided guards and accessories must
be installed as detailed in these assembly instructions.
STEP ONE
Remove all contents from package and place on a
clean, fl at surface. Inspect the shipment for any dam-
ages. Make sure you have all the parts needed.
STEP TWO
Arrange the three Float Sections (Part B1) upright
(plug on bottom) so the overlap of one section aligns
with the next section and loosely push the three sec-
tions together to form a continuous ring.
Float up
STEP THREE
Position one Top Float Bracket (Part B2) so that the
bolt holes in the bracket align with the bolt holes in
the two adjoined fl oat sections and insert two 9" Black
Coated Bolts (Part B4) through the assembly. This
may require some minor repositioning of the fl oat sec-
tions as you push the bolt all the way through. Do not
force the bolt through. Repeat for the remaining two
joints.
Float down
(plug)