Cisco AMP PC3000 Hardware Installation Manual page 42

Maintenance and Upgrade
Remove and Replace a Power Supply
Figure 34: Remove and Replace the AC Power Supply
1 Release lever 2 Handle
Step 2 Install a new power supply:
a) Grasp the power supply handle and insert the new power supply into the empty bay.
b) Push the power supply into the bay until the release lever locks.
c) Connect the power cord to the new power supply.
d) If you shut down the AMP PC3000, press the Power button to return it to main power mode.
Cisco AMP PC3000 Hardware Installation Guide
38