The following figure shows the front panel features and disk-drive configuration for the AMP PC3000. See
Front Panel LEDs, on page 6
Figure 4: AMP PC3000 Front Panel
for a description of the LEDs.
Drive bays 1-14 are populated with SSDs
for the /data volume.
Power button/power status LED
System status LED
Temperature status LED
Network link activity LED
Used with KVM cable that provides one
DB-15 VGA, one DB-9 serial, and two
Drive bays 15-24 populated with SAS
HDDs for the /other volume.
Unit identification button/LED
Fan status LED
Power supply status LED
Pullout asset card
Cisco AMP PC3000 Hardware Installation Guide