Table of Contents
Advertisement
DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
6.2.5
Combined Slot for 16 mm and 22.5 mm Switching Element
①
Cut-outs of the 22.5 mm sized control and indicator units
Fig.6-7:
Position of the cut-outs for 22.5 mm control and indicator units for
VAM42.1-PB-NF-NN-TB-VD-NN-1608-NN
The VAM12.1-PB-NF-NN-TB-VD-NN-1608-NN and VAM42.1-PB-NF-NN-TB-
VD-NN-1608-NN device variants offer a slot, where either a 16 mm or a 22.5
mm hole can be cut-out, see
mm control and indicator units for VAM12.1-PB-NF-NN-TB-VD-NN-1608-NN
und VAM42.1-PB-NF-NN-TB-VD-NN-1608-NN" on page
①
Cut-out for 16 mm or 22.5 mm control and indicator units
Fig.6-8:
Position of the cut-outs for 16 mm or 22.5 mm control and indicator units
for VAM12.1-PB-NF-NN-TB-VD-NN-1608-NN und VAM42.1-PB-NF-
NN-TB-VD-NN-1608-NN
Bosch Rexroth AG
fig. 6-8 "Position of the cut-outs for 16 mm or 22.5
47/93
Module Design
47.
1
Advertisement
Table of Contents
