Wiring Of The Pushbuttons And Of The Emergency Stop Button For Customized Device Variant "D1; Wiring Of The Pushbuttons And Of The Emergency Stop Button Vam 12.1, Device Variant "D1 - Bosch REXROTH IndraControl VAM 42.1 Project Planning Manual

DOK-SUPPL*-VAM*XX.1***-PR02-EN-P
Rexroth IndraControl VAM 12.1/42.1 Machine Control Panels
7.6 Wiring of the Pushbuttons and of the EMERGENCY STOP
button for Customized Device Variant "D1"
7.6.1 Wiring of the Pushbuttons and of the EMERGENCY STOP Button
VAM 12.1, Device Variant "D1"
Spannungsanschluss an B-LP VAM_LOGIK_DP 1070088279 Voltage connection
X10 Pin3 UL - +24V DC logic supply UL
X10 Pin4 0V UL - 0V logic supply UL
X10 Pin1 UQ - +24V DC input/output voltage UQ
0V input/output supply UQ
X10 Pin2 0V UQ -
X10 Pin3
X10 Pin4
X10 Pin1
X10 Pin2
3 3 1 3 3
S1 S2 S4 S5 S7
4 4 2 4 4
4
X1 X1 X1 X1
H1 H2 H5 H7
X2 X2
X2 X2
Fig.7-15: Wiring of the pushbuttons and of the EMERGENCY STOP button
VAM 12.1, device variant "D1"
Fig.7-16: Position and numbering of the pushbuttons and LEDs VAM 12.1, device
variant "D1"
Bosch Rexroth AG
3
3 3 1 3
S8 S9 S10 S12 S13
4 4 4 2 4
1
2
X1 X1
X1 X1
H10 H13
H8 H9
X2 X2 X2 X2
1
2
4 5
13
7 10 12 13
8 9
61/93
Interfaces
Connection module VAC30.2 on VAM12.1
X1.2 Pin3 24V hand-held terminal 24V h Handbediengerät
X1.2 Pin1 24V VAC30
X1.1 Pin1 24V VAC30
X1.1 Pin2 GND
EMERGENCY STOP on VAM12.1 front panel
3 N/O contact. Color of the cable strand: green
4
N/O contact. Color of the cable strand: black