Mitsubishi Electric MELSERVO J5 Series User Manual page 22

Refer to the following table for selecting a response mode.
Response mode
Low mode Basic mode
■One-touch tuning execution
Clicking "Start" after selecting a response mode starts the one-touch tuning in the user command method.
Page 19 Command method and response mode selection
For the one-touch tuning in the user command method, clicking "Start" during a servo motor stop causes "C_02" or "C_04"
shown at the status of the error code. (Refer to the following for the error code.)
Page 31 One-touch tuning error
3 ADJUSTMENT METHOD
20
3.2 One-touch tuning
Responsiveness
High mode
Low response
High response
Machine characteristic
Guidelines for corresponding mode and machinery
Arm robot
General machine tool
Precision working
machine
Conveyor
Inserter
Mounter
Bonder