Precautions For Installation Of Basic Base Unit - Mitsubishi Electric C70 Connection Manual

3.1.2 Precautions for Installation of Basic Base Unit

Install C70 to a panel, etc., considering enough about operability, maintainability and environmental resistance.
(1) Unit installation position
For enhanced ventilation and ease of module replacement, leave the following space between the
module top/bottom and structure/parts.
(Note) DIN rail installation is not available.
M E L S E C M E L S E C M E L S E C
POWER POWER POWER
MITSUBISHI MITSUBISHI MITSUBISHI
(2) Unit installation orientation
(a) Since C70 generates heat, it should be fitted on a well ventilated location in the orientation shown
below for heat release.
GOOD
(b) Do not use it in either of the orientations shown below.
NG
QXxxxx QXxxxx QXxxxx
QXxxxx QXxxxx QXxxxx QXxxxx QXxxxx QXxxxx QXxxxx QXxxxx QXxxxx
NG
C70 Connection Manual
3.1 Module Installation
P U L L P O W E R Q 6 1 P - A 1 P U L L P O W E R Q 6 1 P - A 1
123.5mm
NG
59