Mitsubishi Electric C70 Connection Manual page 154

Date of revision Manual No.
Dec. 2006 IB(NA)1500261-A
Jan. 2007 IB(NA)1500261-B
Sept. 2007 IB(NA)1500261-C
Mar. 2008 IB(NA)1500261-D
Jul. 2008 IB(NA)1500261-E
Revision History
First edition created.
Second edition created.
- Maximum lengths were added or corrected for some cable types.
- The explanations of the battery holder unit were added.
- Mistakes were corrected.
Third edition created.
- The section composition was greatly changed.
- The following sections were added.
- 3. General Specifications (Environmental Conditions)
- 5. Panel Cut Dimension Drawing / Installation Dimension Drawing
- 6. Installation and Wiring
- 7. Connections of Modules
- Appendix 1. EMC Installation Guidelines
- Appendix 3. Cable/Connector for CNC CPU
- Appendix 4. Servo/Spindle Cable and Connector Specifications (MDS-D/DH
Series)
- Appendix 5. Servo/Spindle Cable and Connector Specifications (MDS-D-SVJ3/
SPJ3 Series)
- Appendix 6. Transportation Restrictions for Lithium Batteries
- Appendix 7. Precautions for Compliance to UL/c-UL Standards
- Mistakes were corrected.
Fourth edition created.
- The section composition was greatly changed:
- "1. Introduction" was merged to the "Introduction" in the beginning of this
manual.
- Explanations of the modules' specifications were all merged in "3. General
Specifications".
- "4. Outline Drawing", "5. Panel Cut Dimension Drawing" and "Appendix 2.
Connector Layout" were merged into the chapter of "General Specifications".
- "6. Installation and Wiring" were divided into two sections, "Installation" and
"Wiring and Connecting".
- "7. Connections of Modules" was merged into the section of "Wiring and
Connecting".
- Chapter and section Nos. were all revised according to the changes above.
- "Example of surge absorber installation" of "Appendix 1.6.3 Surge Absorber" was
corrected.
- Mistakes were corrected.
Fifth edition created.
- "3.1.3 Installation and Removal of Module" was added.
- Mistakes were corrected.
Revision details