YASKAWA SI-EP3 Installation Manual page 15

u
Communication Modular Connector CN1 Port 1/Port 2
The communication modular connector CN1 on the option is a modular dual RJ45 female
connector designated port 1 and port 2. Port 1 and port 2 are the connection point for a
customer supplied male Ethernet network communication cable.
Table 3 Male 8-way Ethernet Modular Connector (Customer-Supplied)
Male EtherNet 8-Way Modular Connector
<1> Not used for 10 Mbps and 100 Mbps networks.
u
Option LED Display
The option has six LEDs:
Bi-color Status LEDs:
• Module status (MS) red/green
• Network status (NS) red/green
Ethernet LEDs (2 each):
• Network speed-10/100 yellow
• Link status and network activity-Link/Act green
Figure 3
1000-Series Label
YASKAWA ELECTRIC TOBP C730600 89D YASKAWA AC Drive Option SI-EP3 Installation Manual
NS MS
Figure 3 Option LED Labels
4 Option Components
Pin
1 (Pair 2)
2 (Pair 2)
3 (Pair 3)
4 (Pair 1)
5 (Pair 1)
6 (Pair 3)
7 (Pair 4)
8 (Pair 4)
GA500, GA700, and GA800 Label
Description
Transmit data (TXD) +
Transmit data (TXD) -
Receive data (RXD) +
Not used
<1>
Not used
<1>
Receive data (RXD) -
Not used
<1>
Not used
<1>
15