X400 Capacity Cube Storage Capacity; Hardware And Software Required For Installation; X400 Capacity Cube Useable Storage Capacity; Hardware And Software Requirements For Cube Installation - Dell EMC PowerProtect X400 Hardware Configuration And Installation Manual

X400 capacity cube storage capacity

Useable storage
capacity for 1
capacity cube (TB)
X400H capacity 64 - 96
cube
X400F capacity 64 - 112
cube

Hardware and software required for installation

Component
Sliding rail
Static rail
Rack
Network switch
Note: The illustrations in this guide are examples only. Depending on your
configuration, illustrations may look somewhat different from what is shown here.
The minimum licensed capacity for a X400 capacity cube is 64 TB. You can increase
the storage capacity in 16 TB increments for each X400 capacity cube (
For example, you can purchase a X400H capacity cube licensed for 64 TB and then
add storage in 16 TB increments to increase capacity to 80 TB, up to a maximum of 96
TB. Similarly, you can purchase a X400F capacity cube licensed for 64 TB and then
add 16 TB increments to increase capacity to 80 TB, then 96 TB, up to a maximum of
112 TB. The following table shows the minimum and maximum useable storage
capacities for X400H capacity cubes and X400F capacity cubes.
Table 1 X400 capacity cube useable storage capacity
Useable storage
capacity for 2
capacity cubes (TB)
160 - 192
176 - 224
Before installing the X400 platform cube and the X400 capacity cubes, review the
following table to understand the hardware and software requirements for X400 cube
installation.
Table 2 Hardware and software requirements for cube installation
Description
Included with the X400 capacity cubes. Designed to work in any data center rack.
Included with the X400 platform cube. Designed to work in any data center rack.
Customer supplied. All cubes require 2U.
X400 capacity cubes require front, rear, and top access for servicing and should be
placed in the rack to accommodate these requirements.
The X400 platform cube requires front and rear access for servicing.
Customer supplied. One or more. 10 GbE support required. 25 GbE support is
optional. ( The X400 platform cube is configured to run at 10 GbE and the X400
capacity cube can be configured to run at 10 or 25 GbE.)
Switch must support VLAN for isolated internal (private) communication (see
Connect network cables
redundancy.
PowerProtect X400 Appliance Hardware Configuration and Installation Guide
Useable storage
capacity for 3
capacity cubes (TB)
256 - 288
288 - 336
on page 49). Two network switches are recommended for
Overview
grow in place ).
Useable storage
capacity for 4
capacity cubes (TB)
352 - 384
400 - 448
11