Board Layout Dimensions
Retention Module Dimensions
NOTE
Keysight Technologies E5400-Pro Series Soft Touch Connectorless Probes User's Guide
Use the following dimensions to layout your PC board pads and holes for
use with the soft touch probes.
Unless otherwise specified, dimensions are in inches and have the following tolerances.
Linear
X.X = +-0.1
X.XX = +-0.01
X.XXX = +-0.005
X.XXXX = +-0.0005
Angular
X = +-1
X.X = +-0.5
X.XX = +-0.25
X.XXX = +-0.125
4.01 mm
0.158 in.
Figure 10 E5403A retention module dimensions
Mechanical Considerations
2
25