Table of Contents
Advertisement
The E5404A-Pro Series 34-channel Single-ended Soft Touch Probe
(for analyzers with 40-pin cable connectors)
Keysight Technologies E5400-Pro Series Soft Touch Connectorless Probes User's Guide
Overview, Installation, and Selection of Probing Options
The Keysight E5404A-pro series probe is a 34-channel, single-ended, soft
touch probe compatible with the Keysight logic analysis modules listed in
Table 1
on page 12. It is capable of capturing data up to the rated
maximum state (synchronous) analysis clock rates of all the supported
analyzers, with signal amplitudes as small as 500 mV peak-to-peak. A
retention module must be installed on the target system board to attach
the probe to the board.
A kit of five retention modules are supplied with each probe. Refer to
"Ordering retention modules"
more.
See
"Mechanical Considerations"
your target system board.
Figure 3
E5404A-pro series single-ended soft touch probe and
E5403A retention module
on page 13 for information on ordering
on page 19 for information on designing
1
15
Advertisement
Table of Contents
