Tonic Interface Drawing - Renishaw TONiC T103 Series Installation Manual

TONiC interface drawing

4-40 UNC × 2
Cover plate
Diagnostic LED
( Ti0004 - Ti20KD
and
TD4000 - TD0040)
*
Dynamic bend radius not applicable for UHV cables.
TONiC RKLC20-S linear installation guide
8
40
16
33.3
62
R>20 Dynamic bend radius *
R>10 Static bend radius
CAL /AGC push button switch
access hole Ø2.4
CAL button operation
Push and release (<3 seconds) - Calibration (CAL) routine enable/disable
Push and release (>3 seconds) - Automatic Gain Control (AGC) enable/disable
Push and hold during power 'Off / On' cycle - Restore factory defaults
Refer to readhead LED functionality chart for CAL LED indications
67
6 min
Dimensions and tolerances in mm
4