Use In Hazardous Environments - WAGO I/O-SYSTEM 750 Series Manual

WAGO-I/O-SYSTEM 750
750-613 24V DC Power Supply (Bus)
6

Use in Hazardous Environments

The WAGO-I/O-SYSTEM 750 (electrical equipment) is designed for use in
Zone 2 hazardous areas.
The following sections include both the general identification of components
(devices) and the installation regulations to be observed. The individual
subsections of the "Installation Regulations" section must be taken into account if
the I/O module has the required approval or is subject to the range of application
of the ATEX directive.
Manual
Version 1.1.0
Use in Hazardous Environments 33