Securing; Securing In Bsr1 Mode With The Button «Start/Stop - Bernina 770 QE Manual

Special edition
Hide thumbs Also See for 770 QE:
Table of Contents

Advertisement

BERNINA Stitch Regulator (BSR)
Prerequisite:
> Lower the feed dog.
> Select the desired BSR mode.
> Push the button «Start/Stop» or press the foot control to lower the presser foot.
> Push the button «Start/Stop» again or press the foot control again and keep pressed to start the BSR
> Move the fabric to control the speed of the machine in the BSR mode.
> Push the button «Start/Stop» again or release the foot control to stop the BSR mode.
> Touch the icon «BSR» (1) to deactivate the BSR mode and to quilt without automatic stitch length.

11.7 Securing

Securing in BSR1 mode with the button «Start/Stop»
Prerequisite:
> Lower the feed dog.
> Lower the presser foot.
> Push the button «Needle up/down» twice.
> Hold the upper and the bobbin thread.
> Push the button «Start/Stop».
> Sew 5 – 6 securing stitches.
> Push the button «Start/Stop».
> Cut the thread.
132
The slide-on table is attached.
The knee lifter of the Free Hand System is attached.
mode.
– At the BSR presser foot a red light is on.
– The BSR mode stops and the red light at the presser foot goes off.
1
The BSR presser foot is attached and connected with the machine.
The BSR display is opened and the BSR1 mode is activated.
– The bobbin thread is brought up.
– Start the BSR mode.
– The BSR mode stops.

Advertisement

Table of Contents
loading

This manual is also suitable for:

740

Table of Contents