Securing Via The Icon «Securing; Height Compensation Of Uneven Layers - Bernina 770 QE Manual

Creative sewing
Securing via the icon «Securing»
Every single pattern of a stitch pattern combination can be secured either at the beginning or at the end.
> Touch the icon «i»-Dialog.
> Touch the icon «Securing» before starting to sew.
> Touch the icon «Securing» while sewing.

5.9 Height Compensation of uneven layers

If the presser foot is at an angle when sewing over a thick seam, the feed dog cannot grip the fabric and the
sewing project cannot be sewn out properly.
> Place 1 – 3 compensating plates as required from the back of the presser foot close to the needle to level
> Place 1 – 3 compensating plates as required from the front of the presser foot close to the needle to level
> Sew until the complete presser foot has passed the thick seam.
> Remove the plates of the height compensation.
88
– The stitch pattern/stitch pattern combination is secured with 4 stitches at the beginning.
– The stitch pattern or the active stitch pattern of the stitch pattern combination is secured with 4
stitches at the end.
the fabric layer.
– The presser foot is leveled with the sewing project.
the fabric layer.
– The presser foot is leveled with the sewing project.