Lubricating The Machine; Packing The Embroidery Module - Bernina 770 QE Manual

Setup Program
> Touch the icon «Maintenance/Update».
> Touch the icon «Clean the thread catcher».
> Clean the thread catcher according to the instructions on the display.

Lubricating the machine

The Setup Program provides animations how the machine has to be oiled. In chapter «Maintenance and
cleaning» there are additional illustrated step-by-step instructions. Always use BERNINA oil to lubricate.
CAUTION Electronically driven components
Risk of injury near the needle and the hook.
> Switch the machine off and disconnect it from the power supply system.
Lubricating the hook
NOTICE
Too much oil can pollute the fabric and the thread.
> Always sew a test sample first.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Lubricate the machine».
> Lubricate the machine according to the instructions on the display.

Packing the embroidery module

To pack the embroidery module into the original packaging without moving the embroidery arm manually,
the embroidery arm needs to be brought to its packing position.
Prerequisite:
• The embroidery module is connected with the machine.
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
69