Checking The Size And The Position Of The Embroidery Motif - Bernina 770 QE Manual

Creative embroidering

Checking the size and the position of the embroidery motif

It can be checked whether or not the embroidery motif matches the designated position/location on the
fabric. Points which are beyond the embroidery hoop are not traveled to.
> Select an embroidery motif.
> Touch the icon «i»-Dialog.
> Touch the icon «Check embroidery motif size».
check
> Touch the icon «Corner top left» to select the top left corner of the embroidery motif.
> Touch the icon «Corner top right» to select the top right corner of the embroidery motif.
> Touch the icon «Corner bottom left» to select the bottom left corner of the embroidery motif.
> Touch the icon «Corner bottom right» to select the bottom right corner of the embroidery motif.
> Touch the icon «Embroidery motif center» to bring the needle to the center of the embroidery motif.
> Turn the «Upper Multifunctional knob» to move the embroidery motif horizontally.
> Turn the «Lower Multifunctional knob» to move the embroidery motif vertically.
160
– The embroidery hoop travels all the way until the needle is at the position as it is indicated in the
display.
– The embroidery hoop travels all the way until the needle is at the position as it is indicated in the
display.
– The embroidery hoop travels all the way until the needle is at the position as it is indicated in the
display.
– The embroidery hoop travels all the way until the needle is at the position as it is indicated in the
display.
– The embroidery hoop travels all the way until the needle is at the position as it is indicated in the
display. If the embroidery motif hasn't been positioned correctly yet, the position can be altered via
the«Upper/Lower Multifunction knobs» and the complete embroidery positions can be checked again.