Table of Contents
Advertisement
•
Only use accessory recommended by the manufacturer.
•
Don't use this machine when the ventilation openings are blocked. Keep the
ventilation openings and the foot control free from the accumulation of lint,
dust and loose cloth.
•
Never insert any objects into any openings of the machine.
•
Do not place any objects on the foot control.
•
Always use the machine with a foot control of this type LV-1.
•
Do not operate the machine where aerosol products (sprays) or oxygen are
being used.
•
Keep fingers away from all moving parts. Special care is required around the
needle.
•
Neither pull nor push the fabric while sewing. This can cause needle
breakage.
•
When making any adjustments in the needle area – such as such as
threading the needle, changing the needle, threading the hook or changing
the presser foot – turn power switch to «0».
•
Do not use bent needles.
•
Always use the original BERNINA stitch plate.The wrong stitch plate can
cause needle breakage.
•
To disconnect, turn power switch to «0» and then remove the plug from the
outlet. Do not unplug by pulling the cord, instead grasp the plug to pull it
from the outlet.
•
Always disconnect the power plug from the electrical outlet when the covers
are removed or opened, when the machine is lubricated or during any other
maintenance adjustments mentioned in the instruction manual.
•
This machine is provided with double insulation (except USA, Canada and
Japan). Use only identical replacement parts. See instructions for Servicing of
double-insulated products.
•
The sound pressure level is lower than 70 dB(A) under normal conditions.
Important safety instructions
15
Advertisement
Table of Contents
