Table of Contents
Advertisement
Sewing preparation
> Push the button «Needle right» (2) to move the needle to the right.
Needle stop up/down (permanent)
> Touch the icon «Needle stop up/down (permanent)» to fix the needle position permanently.
> Touch the icon «Needle stop up/down (permanent)» again.
Changing the stitch plate
The stitch plate is marked with vertical, horizontal and diagonal lines in millimeters (mm) and inches (inch).
These lines help to guide the fabric when sewing seams and precise topstitching.
Prerequisite:
•
•
•
> Press the stitch plate down at the mark back right until it flips up.
> Remove the stitch plate.
> Place the openings of the new stitch plate above the corresponding guide pins and press down until it
44
1
– The machine stops with needle position down as soon as the foot control is released or the button
«Start/Stop» has been pressed.
–
The machine stops with needle position up as soon as the foot control is released or the button
«Start/Stop» has been pressed.
The feed dog is lowered.
The machine is switched off and disconnected from the power supply system.
Needle and presser foot are removed.
clicks into place.
2
Advertisement
Table of Contents
