Installation; Installation Regulations; Choice Of The Location; Data Plate - REMEHA Gas 120 ACE Series Installation And Service Manual

5

Installation

5.1

Installation regulations

5.2

Choice of the location

Fig.8
0085 Made in France
0085CT009 YY-WW
FR II2Esi3B/P G20-20mbar; G25-25mbar; G30/G31-30/37/50mbar
LT II2H3B/P G20-20mbar; G30/G31 - 30mbar
ES,GR, PT II2H3B/P G20-20mbar; G30/G31 - 30/37/50 mbar
IT II2H3B/P G20-20mbar; G30/G31 - 30/37mbar
LU, RO, EE II2H3P G20-20mbar; G31 - 30mbar
AT II2H3B/P G20-20mbar; G30/G31 - 50mbar
CZ II2H3B/P G20-20mbar; G30/G31-30/37/50mbar
PL II2ELw3B/P G20-20mbar; G27-20mbar; G30/31-37mbar
80/60 °C 18.9-103.9 kW
Pn = 50/30 °C 21.2-109.7 kW
40/30 °C kW
Hi 19.6-107.0 kW
kW
Qn =
Hs (G20) 21.7-118.9 kW
kW
PMS= 4bar - 0.4MPa
Tmax= 90°C
Imax= 10A IP21
230 V 50 Hz 180W
NOx class: 6 (Nox < 56 mg/kWh) CN1: 17
B23(P) - B33 - C13(X) - C33(X) - C43(X) - C53 - C63(X) - C83(X) - C93(X)
CN2: 7
Art. Nr: S/N: A0000YYWW000
7717202 - v03 - 24062019
Caution
Installation of the boiler must be done by a qualified professional
in accordance with prevailing local and national regulations.
Caution
A disconnection device must be fitted to the permanent pipes in
accordance with the installation rules.
Caution
Respect the maximum water inlet pressure to ensure correct
operation of the appliance, referring to the Technical
Specifications chapter.
Decide on the ideal position for installation, bearing in mind any legal
directives and the space required by the appliance.
Install the boiler on a solid, stable structure capable of bearing the
weight of the appliance when full of water and fully equipped.
When choosing the position for installation of the boiler, bear in mind the
positions authorised for the combustion gas discharge outlets and the
air intake vent.
Do not install the boiler near any heat sources.
5.2.1

Data plate

The data plate is located on the back of the boiler.
The data plate provides important information regarding the appliance:
Serial number
Model
Gas category
CN1/CN2
etc.
Once installation is complete, the second data plate supplied in the
documentation bag can be affixed to a more visible part of the boiler.
If the boiler is equipped with a hydraulic kit (low-loss header or plate heat
exchanger), affix the data plate to the side of the boiler.
MW-6000735-01
5.2.2

Space required - Boiler ventilation

Decide on the ideal position for installation, bearing in mind any legal
directives and the space required by the appliance.
Install the boiler on a solid, stable structure capable of bearing the
weight of the appliance when full of water and fully equipped.
When choosing the position for installation of the boiler, bear in mind the
positions authorised for the combustion gas discharge outlets and the
air intake vent.
Do not install the boiler near any heat sources.
5 Installation
Gas 120 ACE 21