Technical Specifications; Homologations; Directives; Ec Declaration Of Conformity - REMEHA Gas 120 ACE Series Installation And Service Manual

3

Technical specifications

3.1

Homologations

Tab.1 Czech Republic, Spain, Greece, Portugal, Switzerland, UK
Category Gas type
II
G20 (H gas)
2H3B/P
G30/G31 (butane/propane)
7717202 - v03 - 24062019
3.1.1

Directives

This product has been manufactured and put into circulation in
accordance with the requirements and standards of the following
European Directives:
Gas Appliances Regulation (EU) (2016/426)
Pressure Equipment Directive 2014/68/EU
Electromagnetic Compatibility Directive (2014/30/EU).
Low Voltage Directive (2014/35/EU).
Efficiency Directive (92/42/EEC)
European Ecodesign Directive (2009/125/EC)
EU Regulation (813/2013)
Energy Labelling Framework Regulation (EU) (2017/1369)
EU Regulation (811/2013)
BS 7074, Part 1: Application, selection and installation of expansion
vessels and ancillary equipment for sealed water systems
BS 6644: Specification for the installation of gas-fired condensing boilers
with a nominal output exceeding 70 kW
BS EN 12828: Design for water-based heating systems
BS EN 13831: Closed expansion vessels
Apart from the legal provisions and Directives, the additional Directives
described in these instructions must also be observed.
For all provisions and Directives referred to in these instructions, it is
agreed that all addenda or subsequent provisions will apply at the time of
installation.
3.1.2

EC Declaration of Conformity

The unit complies with the standard type described in the EC declaration
of conformity. It has been manufactured and commissioned in accordance
with European directives.
The original declaration of conformity is available from the manufacturer.
3.1.3

Gas categories

Connection pressure (mbar)
20
30/37/50
3.1.4

Certifications

Tab.2 Certifications
CE number
NOx class
3 Technical specifications
Gas 120 ACE Gas 120 ACE
- 65 - 90
X X
X X
0085CT0009
6 (EN 15502-1)
Gas 120 ACE
Gas 120 ACE
- 115
X
X
11