Upgrading And Provisioning; Upgrade Via Keypad Menu; Shortcut Of Upgrade And Provision Via Keypad Menu; Upgrade Via Web Gui - Grandstream Networks GRP2612 Administration Manual

UPGRADING AND PROVISIONING

The GRP2612 / GRP2612P / GRP2612W / GRP2613 / GRP2614 can be upgraded via TFTP / FTP / FTPS
/ HTTP / HTTPS by configuring the URL/IP Address for the TFTP / HTTP / HTTPS / FTP / FTPS server and
selecting a download method. Configure a valid URL for TFTP, FTP/FTPS or HTTP/HTTPS, the server
name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com/BETA
fw.mycompany.com
There are two ways to setup a software upgrade server: The LCD Keypad Menu or the Web Configuration
Interface.

Upgrade via Keypad Menu

Follow the steps below to configure the upgrade server path via phone's keypad menu:
•
Press MENU button and navigate using Up/Down arrow to select System.
•
In the System options, select Upgrade.
•
Enter the firmware server path and select upgrade method. The server path could be in IP address
format or FQDN format.
•
Select Start Provision option and press the "Select" Softkey.
•
A warning window will be prompt for provision confirmation. Press "YES" Softkey to start
upgrading/provisioning immediately.
When upgrading starts, the screen will show upgrading progress. When done you will see the phone restarts
again. Please do not interrupt or power cycle the phone when the upgrading process is on.

Shortcut of Upgrade and Provision via Keypad Menu

When GRP phone is in idle state, user could press HOLD key and RIGHT navigation key together to trigger
provision functions. Similarly, phone will pop up reboot banner while idle, if user presses HOLD key and
LEFT navigation key together. After the provision or reboot banner pops up on LCD screen, user could
press YES/NO Softkey to confirm/cancel the action.

Upgrade via Web GUI

Open a web browser on PC and enter the IP address of the phone. Then, login with the administrator
username and password. Go to Maintenance→Upgrade and Provisioning page, enter the IP address or the
FQDN for the upgrade server in "Firmware Server Path" field and choose to upgrade via TFTP or
HTTP/HTTPS or FTP/FTPS. Update the change by clicking the "Save and Apply" button. Then "Reboot" or
GRP26XX Administration Guide
P a g e |
105