Figure 11: Config File Download - Grandstream Networks GRP2612 Administration Manual

"New Password" in the Web GUI→Maintenance→Web Access page→Admin Password. For a detailed
parameter list, please refer to the corresponding configuration template.
When the GRP2612 / GRP2612P / GRP2612W / GRP2613 / GRP2614 boots up or reboots, it will issue a
request to download an XML file named "cfgxxxxxxxxxxxx.xml", where "xxxxxxxxxxxx" is the MAC address
of the phone, i.e., "cfg000b820102ab"
"cfgxxxxxxxxxxxx.xml" file is not successful followed by a configuration file named "cfgxxxxxxxxxxxx", the
phone will issue a request to download a specific model configuration file "cfg<model>.xml", where <model>
is the phone model, i.e., "cfggrp2613.xml" for the GRP2613, "cfgrp2614" for the GRP2614. If this file is not
available, the phone will issue a request to download the generic "cfg.xml" file. The configuration file name
should be in lower case letters.
Note: (Attempt to download Config File again)
When doing provision on the phone, if your first config file contains p-values listed below, phone will try to
download the potential second cfg.xml file and apply the second file without rebooting. Maximum 3 extra
attempts.
Those P-values are:
*212 -- Config upgrade via
*234 -- Config prefix
*235 -- Config postfix
*237 -- Config upgrade Server
*240 – Authenticate Config File
*1359 – XML Config File Password
*8463 – Validate Server Certificate
*8467 – Download and process ALL Available Config Files
*20713 – Always authenticate before challenge
*22011 – Bypass Proxy For
*22030 – Enable SSL host verification for provision
and "cfg000b820102ab.xml".

Figure 11: Config File Download

GRP26XX Administration Guide
If the download of
P a g e |
107