Grandstream Networks GRP2612 Administration Manual page 64

Physical Multi-
Purpose Keys
•
Forward
Set the MPK Button to perform call forwarding to the destination number
configured on the "Value Field". During ringing press the button to
perform the call forward.
•
DND
Press the configured key to enabled/Disable DND.
•
Redial
On this mode, the configured key can be used to redial numbers.
•
Instant Messages
On this mode, the configured key can be used to enter IM menu and
send new messages.
•
Multicast Listen Address
The MPK button can be used to access directly to the Multicast listening
IP list.
•
Keypad Lock
Configure the VPK button to be used to lock/unlock the keypad.
Assigns a function to the corresponding physical MPK. This feature is
available on GRP2614. The key mode options are:
•
Speed Dial
Select the Account to dial from. And enter the Speed Dial number in the
Value field to be dialed, or enter the IP address to set the Direct IP call
as Speed Dial.
•
Busy Lamp Field (BLF)
Select the Account to monitor the BLF status. Enter the extension
number in the Value field to be monitored.
•
Presence Watcher
This option has to be supported by a presence server and it is tied to the
"Do Not Disturb" status of the phone's extension.
•
Eventlist BLF
This option is similar to the BLF option but in this case the PBX collects
the information from the phones and sends it out in one single notify
message.
PBX server has to support this feature.
•
Speed Dial via active account
GRP26XX Administration Guide
P a g e |
64