Grandstream Networks GRP2612 Administration Manual page 77

SNMP Trap Version
SNMP Trap IP
SNMP Trap Port
SNMP Trap Interval
SNMP Trap
Community
SNMP Username
Security Level
Authentication
Protocol
Privacy Protocol
Authentication Key
Privacy Key
SNMP Trap Username
Trap Security Level
Trap Authentication
Protocol
Trap Privacy Protocol
Trap Authentication
Key
Trap Privacy Key
Network → WiFi Settings (Available on GRP2614 only)
Enables / Disables the WiFi on the phone. Default setting is "No".
Enable/Disable WiFi
Country Specifies the Wi-Fi encryption type.
Access Point SSID
Trap version of the SNMP trap receiver. Default is "Trap Version 2".
IP address of the SNMP trap receiver.
Port of the SNMP trap receiver (Default 162)
The interval between each trap sent to the trap receiver
Community string associated to the trap. It must match the community string
of the trap receiver.
Username for SNMPv3
•
noAuthUser: Users with security level noAuthnoPriv and context name
as noAuth.
•
authUser: Users with security level authNoPriv and context name as
auth.
•
privUser: Users with security level authPriv and context name as priv.
Select the Authentication Protocol: "None" or "MD5" or "SHA".
Select the Privacy Protocol: "None" or "DES" or "AES".
Enter the Authentication Key.
Enter the Privacy Key.
User name for SNMPv3 Trap.
•
noAuthUser: Users with security level noAuthnoPriv and context name
as noAuth.
•
authUser: Users with security level authNoPriv and context name as
auth.
•
privUser: Users with security level authPriv and context name as priv.
Select the Authentication Protocol: "None" or "MD5" or "SHA".
Select the Privacy Protocol: "None" or "DES" or "AES".
Enter the Trap Authentication Key
Enter the Trap Privacy Key.
Enters WiFi SSID name to connect.
GRP26XX Administration Guide
P a g e |
77