Grandstream Networks GRP2612 Administration Manual page 44

On Hold Reminder
Tone
RFC2543 Hold
Hide Dialing Password
Disable Call Waiting
Account x → Intercom Settings
Allow Auto Answer by
Call-Info/Alert-Info
Allow Barging by Call-
Info/Alert-Info
Mute on answer
Intercom call
Play warning tone for
Auto Answer Intercom
Custom Alert-Info for
Auto Answer
Account x → Feature Codes
Enable Local Call
Features
Do Not Disturb
(DND)—On
If set to "Enabled", phone will play a reminder tone when it has a call on hold.
The default setting is "Disabled".
Allows users to toggle between RFC2543 hold and RFC3261 hold. RFC2543
hold (0.0.0.0) allows user to disable the hold music sent to the other side.
RFC3261 (a line) will play the hold music to the other side.
Allows users to hide the password when the dialing number matches the
configured prefix.
Enables / disables the call waiting feature for the current account. When set
to "Default", global call feature setting will be used. Default setting is Default.
Allows the phone to automatically turn on the speaker phone to answer
incoming calls after a short reminding beep when enabled, based on the SIP
Call-Info/Alert-Info header sent from the server/proxy. Default setting is "No".
When enabled, the phone will automatically put the current call on hold and
answer the incoming call based on the SIP Call-Info/Alert-Info header sent
from the server/proxy. However, if the current call was answered based on
the SIP Call-Info/Alert-Info header, then all other incoming calls with SIP Call-
Info/Alert-Info headers will be rejected automatically. Default setting is "No".
When enabled, the phone will mute the incoming intercom call.
When enabled, the phone will play warning tone when auto answer Intercom.
Allows to customize Alert-Info header for auto answer. The phone will auto
answer only if matching content of the custom Alert-info header.
When enabled, Do Not Disturb, Call Forwarding and other call features can
be used via the local feature codes on the phone. Otherwise, the provisioned
feature codes from the server will be used. User configured feature codes
will be used only if server provisioned feature codes are not provided. And
once feature codes are configured, either via server provisioning or local
setting, a Softkey named "Features" will show on the LCD screen.
Note : If the device is registered with Broadsoft account, it doesn't matter if
local call features are enabled or disabled, once the Broadsoft account is set,
special feature to Broadsoft and Feature Key Synchronization is enabled, the
call feature will be handled by Broadsoft server, not by the phone.
Configures DND feature code to turn on DND.
GRP26XX Administration Guide
P a g e |
44