Grandstream Networks GRP2612 Administration Manual page 22

Answer and No Answer Timeout.
System sub menu includes the following options:
System
•
Network
Internet Protocol
o
Selects Prefer IPv4 / Prefer Ipv6 / IPv4 only or IPv6 only. The default
setting is "Prefer IPv4".
IP Setting
o
Selects IP mode (DHCP/Static IP/PPPoE); Configures PPPoE account
ID and password; Configures static IP address, Netmask, Gateway,
DNS Server 1 and DNS Server 2.
Wi-Fi Settings (GRP2612W & GRP2614 only)
o
Enables/disables Wi-Fi, scan available Wi-Fi networks.
802.1X
o
Enables/Disables 802.1X mode; Configures 802.1x identity and MD5
password.
Layer 2 QoS
o
Configures 802.1Q/VLAN Tag and priority value. Select "Reset VLAN
Config" to reset VLAN configuration.
•
Bluetooth Settings (GRP2614 only)
Bluetooth Status
o
Displays the status of Bluetooth
Bluetooth MAC
o
Displays the GRP phone's MAC address
Power
o
Turns on/off the Bluetooth feature.
Handsfree Mode
o
Enables/Disables Handsfree mode
Bluetooth Name
o
Specifies GRP phone name when discovered by other Bluetooth
devices.
Start Scan
o
Starts to scan other Bluetooth devices around the phone. If found, user
could press "Pair" Softkey, and enter Pin code to pair to other Bluetooth
devices.
GRP26XX Administration Guide
P a g e |
22