Grandstream Networks GRP2612 Administration Manual page 53

Download Local Call
Recordings
Enable IM Popup
Instant Message
Popup Timeout
Play Tone On
Receiving IM
Allow Incoming Call
Before Ringing
User-Agent Prefix
Auto Provision List
Starting Point
Hide BLF Remote
Status
Show SIP Error
Response
Enable Missed Call
Notification
Enable Call
Completion Service
Enable Incoming Call
Popup
Enable Enhanced
Acoustic Echo
Canceller
When there are recordings presented, you may download them here.
If set to "No", phone will not show a pop up when receiving an IM.
Configures the number of seconds that the message will remain on screen.
Default setting is "10".
If enabled, phone will play a short tone when receiving an IM during idle
state. Default setting is disabled.
This allows incoming calls after dialed but before ringing. This can be used
under custom user configuration based on need. Default setting is No.
Add a new option for input the user agent field with operator configurable
value or value that identifies the device. The option should be configurable
to give the end point device specific identification.
Ex. The value could be Mobile, Fixed, Desktop, etc. The configured "User
Agent" should be prepend to vendor's default User.
Users could select "VPK" or "MPK" which will be used first when the phone
is being automatically provisioned with Eventlist BLF. The default setting is
"VPK". This feature is supported only on GRP2614.
Allows users to hide the Caller ID from showing at the BLF VPK and MPK
Disabled: The VPK will flash between the Caller ID and the BLF account.
Enabled: The VPK will stay under the monitored account and only notify that
there is an incoming call.
Allows users to disable the SIP error message that will be shown on the call
screen.
Allows users to show/hide the notification popup for missed calls. Default is
"No" which will hide call notification popup.
Note: Currently the manually rejected calls are counted as missed calls.
When the automatic redial and call completion service are enabled, and the
user makes a call to callee, when the callee is busy at the moment, phone
will monitor callee's status. Once the callee is available, phone will ask if
user wants to redial again.
If set to "Yes", phone will pop up an incoming call window to notify the call.
If set to "No", there will be no notification pop up on LCD when there is an
incoming call. This way users will not get disrupted by unexpected popup
call but still get notified by the flashing line LED.
Allows users to choose whether to enable or disable the echo canceller on
their phone in speaker mode.
GRP26XX Administration Guide
P a g e |
53