Sensor And Battery Replacement; Battery Replacement - Honeywell MeshGuard FTD-2000 User Manual

Table of Contents

Advertisement

7

Sensor And Battery Replacement

Sensor compartment
Battery compartment
3-pin end

7.1 Battery replacement

1. Use the 3-pin end of the tool to unscrew and open the battery cover by turning it counterclockwise.
2. Remove the battery.
3. Insert the new battery with its positive ("+") pole towards inside of the unit.
4. Replace the battery cover by turning it clockwise with the 3-pin end of the tool.
Note: Only change internal battery in a safe location and use the battery RAE Systems provided (P/N: 500-0111-000),
model ER34615 or XL-205F.
After changing the battery, wait at least 60 seconds before turning the MeshGuard on.
MeshGuard User's Guide
Sensor and battery
removal tool
(P/N 019-2044-000)
Hexagonal end
Battery
Battery cover
34

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents