STATEMENTS, PRECAUTIONS, GUIDELINES, REGULATORY
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class
A computing device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which the user will be
required to correct the interference at his own expense.
Any changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
The use of non-shielded I/O cables may not guarantee compliance with FCC
RFI limits. This digital apparatus does not exceed the Class A limits for radio
noise emission from digital apparatus set out in the Radio Interference
Regulation of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant
les limites applicables aux appareils numériques de classe A prescrites dans le
Règlement sur le brouillage radioélectrique publié par le ministère des
Communications du Canada.
POE PRECAUTIONS (INSIDE BUILDING INSTALLATION ONLY)
The PoE Giga-McBasic LFPT, PoE+ Giga-McBasic LFPT (and PoE
McBasic) are for inside-a-building installation only. These devices cannot
be installed in an outside-of-a-building environment, as they cannot meet PoE
requirements per the PoE standard. If installing the device outside, serious
damage can occur and void any B+B SmartWorx warranty.
PoE & PoE+ Giga-McBasic
18
LFPT
Need help?
Do you have a question about the B+B SmartWorx PoE Giga-McBasic and is the answer not in the manual?
Questions and answers