Units; Profile Magnification; Cursor; 6.11 High Resolution Profile Display - Honeywell Experion MX Operator's Manual

Table of Contents

6.10.5

Units

The Units combo box allows you to change the units.

6.10.6

The Zoom In button magnifies the profile and the Zoom Out button decreases the

magnification of the profile.

6.10.7

You can use the cursor, provided on graph, to display the profile value of any point. Select

the cursor by clicking on the vertical yellow line and dragging the line (the cursor) to any

point on the profile. The Bin value column displays the profile value at the cursor location.

A NaN (Not A Number) is displayed if no data is available at the cursor location.

This display allows operators to view a single profile distributed over three graphs – thus

allowing you to see the profile at a higher resolution. These profiles show the CD variations

for the selected variable. The vertical axis in profiles represents the value of the variable

being measured or monitored. You can select the horizontal axis to display the cross-

direction position in a variety of measurement units; for example, millimeters, inches, or

bins. The Green Lines on the graph shows that data is within limits. The RED line on the

graph shows that data is out of limits.

6510020335

PROCESS INFORMATION DISPLAYS

149

Table of Contents

Do you have a question about the Experion MX and is the answer not in the manual?