Remote Controller Display; Wired Remote Controller; Group Remote Controller - Fujitsu Airstage VR-II Series Service Manual

4-2-4 Remote Controller Display

<< SIMPLE REMOTE CONTROLLER >>
ERROR CODE DISPLAY
If an error occurs, the following display will be shown.
( " " will appear in the set room temperature display.)
If " " is displayed, immediately contact authorized
service personnel.
<< WIRED REMOTE CONTROLLER 3 wire type>>
ERROR CODE DISPLAY
If an error occurs, the following display will be shown.
( " " will appear in the set room temperature display.)
If " " is displayed, immediately contact authorized
service personnel.
<< WIRED REMOTE CONTROLLER 2 wire type>>
If an error occurred, an error icon appears on the Monitor mode screen.
Conference
Mode
Set Temp.
1. Touch the [Status] on the Monitor
mode screen.
<< GROUP REMOTE CONTROLLER >>
ERROR CODE DISPLAY
The air conditioning system must be inspected if "
(error code) appears on the timer and Clock Display, or the
operation lamp is flashing.
*1 ; Model code
-Status
Fri 10:00AM
Air Flow Direction
Fan
VT1
1
Economy
Monitor
Menu
-Status
2. Touch the [Error Information] on
the Status screen.
: Outdoor unit
: Indoor unit

: Group remote controller

: Convertor
Faulty unit No.
(Remote controller address)
Unit number (usually 0)
Page 1/3
Hz
3
Anti Freeze
Off
Off
Next
Error
Page
Information
: "
04-05
Error code
Ex. Error code display
Error code
Ex. Error code display
Error Information
Address
02-01
Error Code
12, 14
Back
2-digit numbers are corresponding to
the error code
Model code *1
Error code
Ex. Error code display
Page 1/5
Next
Page