Fan Motor Removal; Comp Box Cover Removal - Fujitsu Airstage VR-II Series Service Manual

15. Fan motor removal

Remove the Propeller fan.
Note at the installation.
Insert propeller fan and motor shaft reference
D cutting position.

16. Comp box cover removal

Remove
Loose the 2 mounting screws.
Remove the 2 mounting screws.
Remove the Fan Guard.
Cut the cable tie.
Loose
Remove the Comp box cover
by sliding leftward and toward.
06-09
Remove the nut.
Note the tightening torque at the installation.
Tightening torque is from 15 to 20N m.
Remove the 4 mounting screws.
Remove the Fan motor.
.