Remove The Compressor Cover (Top); Remove The Compressor Cover (Outside), - Fujitsu Airstage VR-II Series Service Manual

Comp.cover
(Top)
Color: White&

Remove the Compressor cover (Top).

Note :
Compressor cover (Top) consists of 2 parts.
The inside of the Comp.cover is white, and
the outside of Comp.cover is green.
Remove the Terminal Cover.
Remove the Discharge temp. thermistor
and Compressor shell temp. thermistor.
Remove the Comp Bolts.
(4 places)
Comp. cover
(Body)
Color: White
Green

Remove the Compressor cover (Outside),

Compressor cover (Accumulator), and
Compressor cover (Body).
V(White)
U(Red)
Remove the 3 mounting screws of Terminal.
Discharge temp. thermistor
(TH1)
Compressor shell temp. thermistor
(TH11)
Hook (2 places)
Remove the Crank Case Heaters.
Note the tightening torque at the installation.
Crank Case Heater should not overlap each other.
06-11
[U: Red, V: White, W: Black]
Note the tightening torque at the installation.
Tightening torque is 2.0 ~2.5N m.
W(Black)
Crank Case Heater
(2 places)
Comp. cover
(Accumulator)
Color: white
Comp. cover
(Outside)
Color: Green