Altera Nios II Embedded Evaluation Kit Cyclone III Edition User Manual page 41

Picture Viewer Application
Figure 5–4. Running the Picture Viewer Application
5–5
Nios II Embedded Evaluation Kit, Cyclone III Edition
You can control the slide show as explained below:
To display the next image before the delay time is finished, touch
●
the Forward
panel.
To display the previous image, touch the Reverse
●
located at the left center of the touch panel.
To play or stop the slide, touch the Play
●
button.
On the top center of touch panel you will see the Delay-period
●
(in Sec.). You can increase or decrease the delay period by
touching the Plus
The maximum delay period you can set is 20 seconds. The
minimum is 1 second. The default delay period is 5 seconds.
Development Board Version 1.0.
button located at the right center of the touch
or Minus
button
/Stop
buttons respectively.
Altera Corporation
July 2010