Process Display - Siemens SIPART DR22 Manual

Manual
1.5.4.10 S1 = 9:
xII
FE3
xI
FE1
xIII
FE6
2
oFF,0,1
Figure 1-44 Block diagram, process display
The process display provides the possibility of displaying three process variables (xI to xIII).
The process variables xI and xII are indicated on the x- and w-display whereby the digital and
analog displays are connected in parallel. With the parameters d*I and d*II, if necessary in con-
nection with the linearizers, both process variables can be displayed separately physically cor-
rectly. The switching possibility of the display level is disabled. The LEDs Controller I/Controller
II are dark.
The process variable xIII is indicated by the y-display and can be switched off by the structure
switch S67 in the oFF position. The display range here is 0 to 100 %, according to the position
of S68 mit rising or falling characteristic. The display overrun is -10 to 110 %. Alarm messages
are possible by assigning the limit value alarms A1 to A4 to FE1, FE3 or FE6 (see chapter
1.5.9, page 124).
SIPART DR22 6DR2210
C79000-G7476-C154-03

Process display

d * II
0000
d * I
0000
S67
1
0
S68
1.5 Functional description of the structure switches
1.5.4 Controller types (S1, S49 to S53)
gn (w)
rt (x)
ge (y)
000
1 Technical Description
83