Manual
A large number of prepared functions for controlling processing plants as well as machines and
apparatus is stored in the set value memory of the SIPART DR22. The user programs the
instrument himself by selecting the desired functions by setting structure switches. The total
functioning of the instrument is given by the combination of the individual structure switches.
Programming knowledge is not necessary for the settings. All settings are made without an
additional programming unit exclusively through the front panel of the SIPART DR22 or through
the serial interface. The job-specific program written in this way is saved in the non-volatile user
program memory.
1.4.2
Description of the option modules
The following option modules are described in this chapter
6DR2800-8A
6DR2800-8J
6DR2800-8R
6DR2800-8V
6DR2805-8A
6DR2805-8J
6DR2801-8D
6DR2801-8E
6DR2801-8C
6DR2802-8A
6DR2802-8B
6DR2803-8P
6DR2803-8C
6DR2804-8A
6DR2804-8B
6DR2800-8A
Module with 3 AE, U- or I-input
D Inputs for current and voltage
To expand the analog inputs.
For a description of the module and technical data, see chapter 1.6.2, page 129 (Inputs standard
controller).
SIPART DR22 6DR2210
C79000-G7476-C154-03
Module with 3 AE, U- or I-input
I/U module
R module
UNI module
Reference junction terminal
Measuring range for TC, internal connector
Module with 2 BA (relays)
Module with 2 BE and 4 BA
Module with 5 BE
Analog output module with y-hold function
Module with 3AA and 3BE
Serial interface PROFIBUS-DP
Serial interface RS 232 / RS 485
Module with 4 BA relays
Module with 2 BA relays
1 Technical Description
1.4 Function principle
1.4.2 Description of the option modules
13