Siemens SIPART DR22 Manual page 208

3 Operation
3.3 Configuring level (parameterization and structuring mode)
3.3.9 Structuring mode FPoS (position functions)
Error messages
--PoS Err
D
Ending positioning with unpositioned (but defined) functions is not allowed. If the structuring
preselection level is to be exited with the Exit key, the flashing error message --Pos Err appears
for non-positioned functions. The structuring preselection level is not exited, the error can be
corrected (Enter key) or ignored (Exit key).
The error message is acknowledged by pressing the Enter key. It then jumps back to the first
positioning number marked by nPos in the structuring mode FPos, the error can be corrected.
nPoS Err
D
Ending positioning with a positioning sequence which contains nPos gaps is not allowed.
If the configuring mode is to be exited with the Exit key and nPos gaps still exist, the flashing
error message nPos Err exists. The structuring preselection level is not exited, the error can
be corrected (Enter key) or ignored (Exit key). The error message is acknowledged by pressing
the Enter key. It then jumps back to the first positioning number marked by nPos in the structu-
ring mode FPos, the error can be corrected.
Digital display
x (question)
position number no.
1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
↓
31
1)
with Enter function
Table 3-11 Question and answer cycle, structuring mode FPos
206
w (answer)
function
nPoS
Ar1
↓
Ar6
1)
dELt
↓
Fu1
Fu2
1)
inSt
MA1
MA2
MA3
Mi1
Mi2
Mi3
rE1
AS1
↓
AS5
Co1
Co2
nA1
nA2
no1
no2
Manual
SIPART DR22 6DR2210
C79000-G7476-C154-03