Siemens SIPART DR22 Manual page 170

3 Operation
3.1 Process operation
20
SIPART DR22
19
100
C
ST
18
A1
80
A2
60
A3
A4
40
20
17
0 I
II
16
OUT-Y
13.2
SIEMENS SIPART DR22
14 15.1
15.2
Figure 3-1 Control and display elements in the process operation
168
1 Internal LED (green)
2 Internal-/External-key
1
2
3 C-LED (green)
3
Int
4 Adaptation LED (yellow) OFF:
4
5.1
6.1
5.1 A1-LED (red)
5.2
SP--W
5.2 A2-LED (red)
6.2
6.1 +Δw-key
7.1
6.2 --Δw-key
7.2
7.1 A3-LED (red)
8
7.2 A4-LED (red)
9
8 Manual-LED (yellow)
10
12
9 H/A-key
11.1
11.2
10 y-external LED (yellow)
13.1
11.1 Controller I-LED (green)
11.2 Controller II-LED (green) Operation/Display level controller II
12 Shift key
13.1 +Δy-key
13.2 - Δy-key
14 Digital display (yellow)
15.1 +Δy-LED (yellow)
15.2 --Δy-LED (yellow)
16 Digital display (red)
17 Analog display (red)
18 Analog display (green)
19 Digital display (green)
20 Exchangeable measuring point label, behind it screw for removing
the front module
ON: Internal setpoint
Switch setpoint or Exit-
key when configuring
ON: no computer standby or
Exit LED when configuring
Adaptation prepared
Flashing: Adaptation in progress
ON: Adaptation ended
Response of limit value A1
Response of limit value A2
Adjusting keys internal setpoint
Response of limit value A3
Response of limit value A4
ON: Manual operation internal
Flashing: Manual operation external
Shift Manual-/Automatic-
operation or Enter key when
configuring
External y-intervention or Enter-LED
in configuring
Operation/Display level controller I
Flashing: Display and active func-
tions are not identical
ON: Display and active
functions are identical
Switch Operation and Display
level controllerI /controller II
Adjusting keys manual manipulated
variable
for the manipulated variable y
Display of the +Δy adjusting increments
in the S-controller
Display of the -Δy adjusting increments
in the S-controller
for the controlled variable x
for the controlled variable x
for the setpoint w
for the setpoint w
SIPART DR22 6DR2210
C79000-G7476-C154-03
Manual