Memory Map; Description - GE MOTOR MANAGER 2 Instruction Manual

6 COMMUNICATIONS

6.5 MEMORY MAP

6.5 MEMORY MAP

6.5.1 DESCRIPTION

The data stored in the MM2 is grouped into two areas: setpoints and actual values. Setpoints can be
read and written by a master computer. Actual Values can be read only. All Setpoints and Actual Val-
ues are stored as two byte values. That is, each register address is the address of a two byte value.
Addresses are listed in hexadecimal. Data values (Setpoint ranges, increments, factory values) are
in decimal.
6
MM2 Motor Manager 2 6-19
GE Power Management