Statistics; Programmable Message; Preferences - GE MOTOR MANAGER 2 Instruction Manual

4 SETPOINTS
PATH: SETPOINTS M S1: CONFIGURATION MMMMMMM STATISTICS
CLEAR TIMERS:
DISABLE
CLEAR START/TRIP
COUNTERS: DISABLE
CLEAR INTERLOCK
COUNTER: DISABLE
CLEAR ENERGY USED:
DISABLE
PATH: SETPOINTS M S1: CONFIGURATION MMMMMMMM PROGRAMMABLE MESSAGE

PROGRAMMABLE MESSAGE

SAMPLE TEXT
PATH: SETPOINTS M S1: CONFIGURATION MMMMMMMMM PREFERENCES
DEFAULT MESSAGE
DELAY: 10 s
DEFAULT MESSAGE
BRIGHTNESS: 60%
GE Power Management
Range: ENABLE, DISABLE
Select ENABLE and press STORE to clear the timers on page
A4: STATISTICS \ TIMERS.
Range: ENABLE, DISABLE
Select ENABLE and press STORE to clear the start and trip counters on
page A4: STATISTICS \ COUNTERS.
Range: ENABLE, DISABLE
Select ENABLE and press STORE to clear the interlock counter on page
A4: STATISTICS \ COUNTERS.
Range: ENABLE, DISABLE
Select ENABLE and press STORE to clear the energy used (kWhrs) on
page A1: DATA \ MOTOR DATA.
Range: 40 ASCII characters
Enter a 40 character message using the VALUE UP/DOWN and
STORE keys. Message is displayed in A1: PROGRAMMABLE MESSAGE.
Range: 3 to 120 seconds in steps of 1
The default message delay can now be adjusted with this setpoint.
Range: 0 to 100% in steps of 20
The display brightness can now be adjusted when it is not in use.
MM2 Motor Manager 2
4.2 S1 CONFIGURATION

4.2.8 STATISTICS

4.2.9 PROGRAMMABLE MESSAGE

4.2.10 PREFERENCES

4
4-7