Entering Setpoints - GE MOTOR MANAGER 2 Instruction Manual

8.4 USING MM2PC
The following example illustrates how to enter setpoints from MM2PC
1. Select the Setpoint > Protection > Motor Protection menu item.
2. The following window prompts the user for motor protection information.
3. For numerical setpoints (in the example above, FULL LOAD CURRENT, HOT/COLD CURVE RATIO, and
OVERLOAD PICKUP LEVEL), click the
rement the setpoint by its step value. Alternately, click the mouse pointer anywhere inside the
setpoint box to display a numerical keypad showing the OLD value, RANGE, and INCREMENT
of the setpoint value being modified.
8
4. For setpoints requiring a non-numeric value (in the example above, OVERLOAD CURVE NUMBER),
click anywhere inside the setpoint box to open a drop-down menu. An appropriate setpoint may
then be selected.
5. After setpoint modifications are complete, click the OK to save the values into the local PC mem-
ory, Cancel to return to the previous values, or Store to send the values to the MM2 (if con-
nected). Clicking on Help displays help topics related to the setpoints being modified.
8-10
®
L M
/ arrow keys at the end of the dialog box to increment/dec-
Enter the new value by clicking on the numerical keys.
Click
Click
MM2 Motor Manager 2

8.4.4 ENTERING SETPOINTS

®
.
Accept to exit the keypad and keep the new value.
Cancel to exit the keypad and keep the old value
®
8 MM2PC SOFTWARE
GE Power Management