8.1 OVERVIEW
®
If MM2PC
is already installed it may require upgrading. Run the software and follow the procedure
below:
1. While MM2PC
autostart (alternately, load the index.htm file into your web browser) OR
2. Go to the GE Power Management website at www.GEindustrial.com/pm (preferred method).
3. Select the Software menu item then select MM2 Motor Manager 2 from the list of products.
4. Verify that the software version shown on this page is identical to the installed version as shown
below. Select the Help > About MM2PC
the local PC.
8
8-2
8.1.3 CHECKING IF INSTALLATION/UPGRADE IS REQUIRED
®
is running, insert the GE Power Management Products CD and allow it to
MM2 Motor Manager 2
®
menu item to determine which version is installed on
No upgrade is required
if these two numbers match
®
8 MM2PC
SOFTWARE
GE Power Management