Viewing Actual Values - GE MOTOR MANAGER 2 Instruction Manual

®
8 MM2PC SOFTWARE
The following example shows how to view and trend MM2 actual values.
1. Establish communications with the MM2 unit and select the Actual > Statistics menu item. This
opens the window showing the relevant monitored values. These values are continuously
updated while the window is open.
®
2. The MM2PC trending feature can be used to plot measured parameters. The following values
can be trended:
• Phase currents ( I
ance, analog input, voltage, and power.
3. Select the Actual > Trending menu item to open the trending window (see figure on following
page). Press the Setup button on the lower left of the window to enter the Graph Attribute page.
GE Power Management
, I , I ), ground current ( I
a b c
MM2 Motor Manager 2

8.4.5 VIEWING ACTUAL VALUES

), motor load, thermal capacity, current unbal-
gnd
®
8.4 USING MM2PC
8-11
8